Unique Slip-Lock Feature
-
Easy to set up, accurate and rapid height
adjustments
-
Quickly adjusts to any height
within the specific model range
-
No tools required for set-up
or disassembly
-
No knobs or wing nuts to
adjust
-
All tube surfaces have
protective anodized coating
Model Size
Information
The smaller
number is the collapsed height of the upright assembly when NOT installed on a
base assembly. Use this number for storage and transportation considerations.
The larger number is the maximum set height.
Example:
Model No. 9' - 16'
(2 Piece)
Minimum collapsed
height (off base assembly) = 9'
Minimum set height (on base assembly with 6" pin) = 9' 6"
Maximum set height (on base assembly with 6" pin) = 16'
No tools required for
setup or disassembly.
How
SLIP-LOCK Works
The SLIP-LOCK
collar assembly locks automatically when the inner pole is raised vertically to
the desired height. As a vertical load is applied downward, the ball-taper lock
feature locks tighter. The more pressure applied downward the tighter it will
lock. To release the lock, simply raise the inner pole slightly and lift the
release ring. For SAFETY, hold the inner pole firmly while raising or lowering
the height.
Repair Parts & Extensions
Repair
Ends
Damaged slot areas
at the top can be cut off and easily replaced with a repair end
secured with a pop rivet.
Collar
Assemblies
Damaged locking collar
assemblies can be cut off and replaced with new collar assemblies.
Extensions
Upright heights can be
temporarily increased by installing extensions of various heights.
|
