|
|
|
|
 |
Slots
STANDARD UPRIGHTS
Each Upright is
equipped with a
set of (4) slots positioned every 90°
- Slots are located 3/8"
from top leaving a solid ring for added strength
- 3' Uprights have one set
of four slots at the top
- 6' and over Uprights have
two sets of four slots (one set at 3' and one set at the top)
- Additional sets of four
slots may be added at any location
- Chrome end cap is
standard on all 3' Uprights
- All tube surfaces have
protective anodized coating
- Special Order
Black Powder Coated available for an additional cost (call for prices)
- Custom
Heights Available
|
|
|
|
|
|
|
1 1/2" O.D.
STANDARD UPRIGHTS |
|
Part #
|
Size
|
|
315 |
3' x 1 1/2" O.D.
(with chrome cap) |
| 615 |
6' x 1 1/2"
O.D. |
| 815 |
8' x 1 1/2"
O.D. |
| 1015 |
10' x 1
1/2" O.D. |
| 1215 |
12' x 1
1/2" O.D. |
| Special |
Custom
Heights available |
| 815-2 |
2 Piece
8' x 1 1/2" O.D. |
|
2" O.D.
STANDARD UPRIGHTS |
| 320 |
3' x 2" O.D.
(with chrome cap) |
| 620 |
6' x 2" O.D. |
| 820 |
8' x 2" O.D. |
| Special |
Custom
Heigths available |
|
OLD STYLE
SCREW-IN TYPE |
| 315S |
3' x 1 1/2"
O.D. (with chrome cap) |
| 815S |
8' x 1 1/2"
O.D. |
|
|
|
|
|
Repair Ends
Damaged slot areas at the top can be cut off and easily replaced with
a repair end secured with a pop rivet.
  |
Upright
Extensions
Upright heights
can be temporarily increased by installing extenders of various heights.
 |
| |
|
Do you
need ...
Standard Upright Dollies?
Adjustable Uprights?
Base
Assemblies - Low Profile?
|
