Telescopic Flagpoles that telescope from 5ft to 25ft in seconds

		Here forYou ~ How can we ~ best serve You? Digital Printing - Flag Makers - Branding Experts SCREEN-PRINT- LITHO- DYE SUB	Email ORDER FORM		888-327-3524 800-365-5185
	ART REQUIREMENTS \| BANNERS \| BUNTING \| FLAGS \| FLAG CASES \| FLAGPOLES \| PARADE FLOAT \| PENNANT STREAMERS \| RODEO \| SEALS

TELESCOPING FLAGPOLES
AVENUE OF FLAGS | ALUMINUM | FIBERGLASS | GUIDON STAFFS | HONOR GUARD
OUTRIGGER | INDOOR | LIGHTPOLE | TAILGATE | TANGLE-FREE | TRAILER HITCH POLES | POLE HARDWARE

SALE

With a convenient flick of a spring release button our poles extend or retract within seconds and you never have to search for the holes.

Telescoping flagpoles Made in the USA - Easy Up Easy down - from 4ft to 25ft in seconds - same day shipping

°Pole extends from 5 feet to 20 feet in mere seconds.

°Folds up nice and compact in Camper, Garage or Shed Storage whenever you desire.

°Pole is light enough for an 8 year old girl to carry.


SPRING DAYS SALE WE TOOK OFF AN ADDITIONAL 25%
25' Clear Anodized	$399.00
25' Bronze Anodized	$419.00
20' Clear Anodized	$249.00
20' Bronze Anodized	$249.00
20' Black Anodized	$249.00
20' White Anodized	$249.00
16' Clear Anodized	$249.00
16' Bronze Anodized	$239.00
16' Black Anodized	$239.00
16' White Anodized	$239.00
15' Clear Anodized	$239.00

WE TOOK OFF AN ADDITIONAL 25%

Rope and Pulley Free
Noise Free
Maintenance Free
Durable (16gauge aluminum)
Heavier Duty wall thickness on bottom tubes makes pole more rigid less flimsy.
Easy Storage

	ACCESSORIES

	Get that attention - Show your U.S.A pride anywhere you wish: RV campsite Concession stand Car dealership Tailgate party Indoor tradeshow presentation Etc.		EAGLES GOLD PLATED COPPER OR NATURAL PAINTED

DESCRIPTION	YOUR PRICE
RV Stand	$79.00
Dock Mount	$79.00
3 inch Gold Ball	$25.00
Flash Collar	$29.00
8" Gold Eagle	$39.00
12" Gold Bronze Eagle	$109.00
12" Natural Eagle	$119.00
16" Gold Bronze Eagle	$129.00
16" Natural Eagle	$14100

Stand - $49.00
This durable wheel-stand holds your telescoping flagpole
for other than permanent environments

ALUMINUM WHEEL STAND
teleccopicbus.jpg (2766 bytes)

teleccopicbus.jpg (2766 bytes)

teleccopicbase.jpg (3609 bytes)

	REPAIR PARTS

	CLICK TO ENLARGE

	Part #		Description
	FP006-1		Tube #1 (top) Complete Anodize
	FP007-1		Tube #2 Complete Anodized
	FP008-1		Tube #3 (for 20') Complete Anodized
	FP008-2		Tube #3 (largest on 16') Complete Anodized
	FP009-1		Tube #4 (largest on 20') Complete Anodized
	FP010-1		Top swivel (w/out clips)
	FP011-1		Tube #1 Top Cap
	FP012-1		Double Swivel (w/out clips)
	FP013-1		Lower Swivel (w/out clips)
	FP014-1		Tube #2 Bottom Cap
	FP015-1		Tube #3 Bottom Cap
	FP016-1		Tube #4 Base Cap w/foam bumper (for 20' only)
	FP017-1		Tube #1 Bottom Cap
	FP018-1		Tube #1 Spring Button
	FP019-1		Tube #2 Spring Button w/foam bumper
	FP020-1		Tube #3 Spring Button w/foam bumper
	FP021-1		Tube #3 Clear Top Bushing w/set screw
	FP022-1		Tube #2 Clear Top Bushing w/set screw
	FP023-1		Tube #4 Clear Top Bushing w/set screw
	FP025-1		Ground sleeve for 20' pole-Complete/ w/collar
	FP026-1		Locking Collar w/set screw for 20' ground sleeve
	FP032-1		Tube #3 Base Cap w/foam bumper (for 16' only)
	FP033-1		Ground sleeve for 16' pole-Complete w/collar
	FP034-1		Locking Collar w/set screw for 16' ground sleeve
	FP1011		Gold Ball (3")
	FP1012		Nylon US Flag (3 x 5)
	FP1600-1		Hardware Kit for 16' flagpole
	FP2000-1		Hardware Kit for 20' flagpole
	FP3000-1		Ground sleeve stop bolt w/nut
	FP3010		Allen wrench 5/64"
	FP3011-1S		Flag Clips (4) for swivels (stainless)
	FP3012		Plastic storage cap for 20' flagpole
	FP3013		Plastic storage cap for 16' flagpole
	FP9040		Wheel-stand- Universal- 16' & 20'
	FP9045		Deck/ Dock Mount- Universal- 16' & 20'
	FPLOCK MECH		Locking mechanism for - 16' & 20'

		FP-LOCK-MECH

	INSTALLATION INSTRUCTIONS

	CLICK TO ENLARGE
	What You Will Need: Telescoping Flagpole Sleeve that came with the Telescoping Flagpole 3 bags of pre-mixed concrete (40 lbs each) Measuring stick Level Small rock or course gravel Something to mix the concrete or cement

	1. Make sure you have all items listed. 2. Dig a hole approximately 12" in diameter and 22" deep in hard soil conditions. A larger hole may be required in light soil. 3. Place a bed of gravel or small rock in the hole. 4. Install the stop bolt and nut through the sleeve as shown. This is important since the bolt will keep the flagpole up off the bottom. 5. Place the sleeve in the hole with the stop bolt facing down. 6. Place small rock or gravel in and around the sleeve to a height of 2" from the bottom of sleeve. This will help with drainage. 7. Mix the concrete or cement. 8. Pour the concrete or cement around the sleeve, being careful not to get concrete or cement inside the sleeve. Fill the hole approximately 1" from ground level with the concrete or cement. 9. Please the flagpole in the sleeve and level the flagpole from two sides. When the sleeve is level, carefully remove the flagpole, making sure you do not disturb the position of the sleeve. 10. Let the concrete or cement harden for at least 24 hours. We strongly suggest placing some warning or object near the hole to prevent people from moving the sleeve or tripping in the hole. 11. After at least 24 hours place dirt or other landscape material around the sleeve to create a finished look and prevent accidents. The plastic cap that comes with your flagpole should be used to plug the sleeve when the flagpole is removed from the sleeve. Prior to Using the Optional Locking Ground Sleeve Feature 1. Insert the pole into ground sleeve. 2. Install one long "childproof" Allen screw lock in the threaded hold of the ground sleeve collar. 3. Tighten the Allen screw lock against the pole to make a mark (See Figure 2). 4. Loosen the Allen screw lock and remove the pole from the sleeve. 5. CAUTION: Extend the second section from the bottom at least 2 feet to prevent drilling through both poles. 6. Center punch at the mark left by the screw lock, and using a 3/16" drill bit, drill a hole through one wall of the outer section.