FBS INDUSTRIESlogo



- Digital Printers
- Flag Makers -
- Branding Experts

HOME -  BANNERS BUNTING -  FLAGS - FLAG CASES -  FLAGPOLES -        PARADE FLOAT - PENNANT  STREAMERS  -  RODEO -  WALL SEALS

  

 

facebook tag    

CALL:1-888-FBS-FLAG EMAIL ORDER FORM
 
 

TELESCOPING FLAGPOLES
 

 


 

ALUMINUM
AVENUE OF FLAGS
GUIDON STAFFS
HONOR GUARD
OUTRIGGER
INDOOR
LIGHT POLE
POLE HARDWARE
TAILGATE
TANGLE-FREE
TRAILER HITCH POLES

  flagpole_detail.jpg (6859 bytes)

SALE

With a convenient flick of a spring release button our poles extend or retract within seconds and you never have to search for the holes.

Telescoping flagpoles Made in the USA - Easy Up Easy down - from 4ft to 25ft in seconds - same day shipping

°Pole extends from 5 feet  to 20 feet in mere seconds.

°Folds up nice and compact in Camper, Garage or Shed Storage whenever you desire.

°Pole is light enough for an 8 year old girl to carry.

SUMMER DAYS SALE
WE TOOK OFF AN ADDITIONAL 25%


25' Clear Anodized

$399.00
25' Bronze Anodized $419.00
20' Clear Anodized $249.00
20' Bronze Anodized $249.00
20' Black Anodized $249.00
20' White Anodized $249.00
16' Clear Anodized $249.00
16' Bronze Anodized $239.00
16' Black Anodized $239.00
16' White Anodized $239.00
15' Clear Anodized $239.00
WE TOOK OFF AN ADDITIONAL 25%
  • Rope and Pulley Free
  • Noise Free
  • Maintenance Free
  • Durable (16gauge aluminum)
  • Heavier Duty wall thickness on bottom tubes makes pole more rigid less flimsy.
  • Easy Storage
 

email tag Email               ORDER FORM tag ORDER FORM              Phone: 888-327-3524

 

CALL:1-888-327-3524

 

 

 

 

ACCESSORIES

 
     
 
Get that attention - Show your U.S.A pride anywhere you wish:

*RV campsite
*Concession stand
*Car dealership
*Tailgate party
*Indoor tradeshow presentation
*Etc.

 

  EAGLES
GOLD PLATED COPPER
OR NATURAL PAINTED

Eagles.jpg (10491 bytes)

 

DESCRIPTION

YOUR PRICE

 RV Stand $79.00
 Dock Mount $79.00
 3 inch Gold Ball $25.00
 Flash Collar $29.00
 8" Gold Eagle $39.00
 12" Gold Bronze Eagle $109.00
 12" Natural Eagle $119.00
 16" Gold Bronze Eagle $129.00
 16" Natural Eagle $14100
 Stand - $49.00
 This durable wheel-stand holds your telescoping flagpole
 for other than permanent environments


 ALUMINUM WHEEL STAND

teleccopicbus.jpg (2766 bytes)teleccopicbase.jpg (3609 bytes)
 

email tag Email               ORDER FORM tag ORDER FORM              Phone: 888-327-3524

 

CALL:1-888-327-3524

 

 

  REPAIR PARTS  
  CLICK TO ENLARGE
20-Foot  TopFlight™ Telescoping Flagpole  
  Part #   Description  
  FP006-1  

Tube #1 (top) Complete Anodize

 
  FP007-1  

Tube #2 Complete Anodized

 
  FP008-1  

Tube #3 (for 20') Complete Anodized

 
  FP008-2   Tube #3 (largest on 16') Complete Anodized  
  FP009-1   Tube #4 (largest on 20') Complete Anodized  
  FP010-1   Top swivel (w/out clips)  
  FP011-1   Tube #1 Top Cap  
  FP012-1   Double Swivel (w/out clips)  
  FP013-1   Lower Swivel (w/out clips)  
  FP014-1   Tube #2 Bottom Cap  
  FP015-1   Tube #3 Bottom Cap  
  FP016-1   Tube #4 Base Cap w/foam bumper (for 20' only)  
  FP017-1   Tube #1 Bottom Cap  
  FP018-1   Tube #1 Spring Button  
  FP019-1   Tube #2 Spring Button w/foam bumper  
  FP020-1   Tube #3 Spring Button w/foam bumper  
FP021-1 Tube #3 Clear Top Bushing w/set screw
  FP022-1   Tube #2 Clear Top Bushing w/set screw  
  FP023-1   Tube #4 Clear Top Bushing w/set screw  
  FP025-1   Ground sleeve for 20' pole-Complete/ w/collar  
  FP026-1   Locking Collar w/set screw for 20' ground sleeve  
  FP032-1   Tube #3 Base Cap w/foam bumper (for 16' only)  
FP033-1 Ground sleeve for 16' pole-Complete w/collar
FP034-1 Locking Collar w/set screw for 16' ground sleeve
FP1011 Gold Ball (3")
FP1012 Nylon US Flag (3 x 5)
FP1600-1 Hardware Kit for 16' flagpole
FP2000-1 Hardware Kit for 20' flagpole
FP3000-1 Ground sleeve stop bolt w/nut
FP3010 Allen wrench 5/64"
FP3011-1S Flag Clips (4) for swivels (stainless)
FP3012 Plastic storage cap for 20' flagpole
FP3013 Plastic storage cap for 16' flagpole
FP9040 Wheel-stand- Universal- 16' & 20'
FP9045 Deck/ Dock Mount- Universal- 16' & 20'
FP LOCK MECH Locking mechanism for - 16' & 20'

FP-LOCK-MECH
 

email tag Email               ORDER FORM tag ORDER FORM              Phone: 888-327-3524

 

CALL:1-888-327-3524

 

 

 

 

INSTALLATION INSTRUCTIONS


CLICK TO ENLARGE

What You Will Need:
  • Telescoping Flagpole
  • Sleeve that came with the Telescoping Flagpole
  • 3 bags of pre-mixed concrete (40 lbs each)
  • Measuring stick
  • Level
  • Small rock or course gravel
  • Something to mix the concrete or cement
  • 1. Make sure you have all items listed.

    2. Dig a hole approximately 12" in diameter and 22" deep in hard soil conditions. A larger hole may be required in light soil.

    3. Place a bed of gravel or small rock in the hole.

    4. Install the stop bolt and nut through the sleeve as shown. This is important since the bolt will keep the flagpole up off the bottom.

    5. Place the sleeve in the hole with the stop bolt facing down.

    6. Place small rock or gravel in and around the sleeve to a height of 2" from the bottom of sleeve. This will help with drainage.

    7. Mix the concrete or cement.

    8. Pour the concrete or cement around the sleeve, being careful not to get concrete or cement inside the sleeve. Fill the hole approximately 1" from ground level with the concrete or cement.

    9. Please the flagpole in the sleeve and level the flagpole from two sides. When the sleeve is level, carefully remove the flagpole, making sure you do not disturb the position of the sleeve.

    10. Let the concrete or cement harden for at least 24 hours. We strongly suggest placing some warning or object near the hole to prevent people from moving the sleeve or tripping in the hole.

    11. After at least 24 hours place dirt or other landscape material around the sleeve to create a finished look and prevent accidents. The plastic cap that comes with your flagpole should be used to plug the sleeve when the flagpole is removed from the sleeve.

    Prior to Using the Optional Locking Ground Sleeve Feature

    1. Insert the pole into ground sleeve.

    2. Install one long "childproof" Allen screw lock in the threaded hold of the ground sleeve collar.

    3. Tighten the Allen screw lock against the pole to make a mark (See Figure 2).

    4. Loosen the Allen screw lock and remove the pole from the sleeve.

    5. CAUTION: Extend the second section from the bottom at least 2 feet to prevent drilling through both poles.

    6. Center punch at the mark left by the screw lock, and using a 3/16" drill bit, drill a hole through one wall of the outer section.
     

    email tag Email               ORDER FORM tag ORDER FORM              Phone: 888-327-3524

     

    CALL:1-888-327-3524